PRISMATIC CELL · 3.2V 100AH LIFEPO4
3.2V 100Ah LiFePO4 Prismatic Battery Cell
Nominal voltage 3.2 V · Nominal capacity 100 Ah (320 Wh) · Aluminum-shell prismatic format · LiFePO4 chemistry.
View SpecificationsINDUSTRY / MACHINE EQUIPMENT / AERIAL LIFTS & BOOM PLATFORMS
Scissor Lifts & Aerial Work Platforms: Compatible Voltage Platforms & Custom Options
Electric slab scissor lifts, vertical mast lifts, and articulated boom aerial work platforms (AWP) rely on 24V (25.6V) and 48V (51.2V) deep-cycle power to drive hydraulic lift pumps and wheel motors across rental fleet job sites. Review 3.2V 100Ah–230Ah prismatic LiFePO4 cells and custom tray solutions.
- Application Scope
- Electric slab scissor lifts, vertical mast lifts, articulated boom lifts
- Voltage Platform
- 24 V (25.6 V) and 48 V (51.2 V) deep-cycle hydraulic pump packs
- Cell Options
- 3.2V 80Ah / 100Ah / 150Ah / 206Ah Prismatic LiFePO4 Cells
COMPATIBLE BARE CELLS · AERIAL LIFTS & BOOM PLATFORMS
Compatible Voltage Platforms & Custom Options
PRISMATIC CELL · 3.2V 105AH LIFEPO4
3.2V 105Ah LiFePO4 Prismatic Battery Cell
Nominal voltage 3.2 V · Nominal capacity 105 Ah (336 Wh) · Aluminum-shell prismatic format · LiFePO4 chemistry.
View Specifications
PRISMATIC CELL · 3.2V 150AH LIFEPO4
3.2V 150Ah LiFePO4 Prismatic Battery Cell
Nominal voltage 3.2 V · Nominal capacity 150 Ah (480 Wh) · Aluminum-shell prismatic format · LiFePO4 chemistry.
View Specifications
PRISMATIC CELL · 3.2V 230AH LIFEPO4
3.2V 230Ah LiFePO4 Prismatic Battery Cell
Nominal voltage 3.2 V · Nominal capacity 230 Ah (736 Wh) · Aluminum-shell prismatic format · LiFePO4 chemistry.
View SpecificationsCUSTOM BATTERY PACK ENGINEERING (AERIAL LIFTS & BOOM PLATFORMS)
Need a Custom 24 V (25.6 V) and 48 V (51.2 V) deep-cycle hydraulic pump packs Pack for Scissor Lifts & Aerial Work Platforms?
AntBattery currently supplies matched bare cells (3.2V 80Ah / 100Ah / 150Ah / 206Ah Prismatic LiFePO4 Cells) and assembles custom 24 V (25.6 V) and 48 V (51.2 V) deep-cycle hydraulic pump packs series-parallel battery packs for Electric slab scissor lifts, vertical mast lifts, articulated boom lifts with tailored L × W × H enclosures, BMS current ratings, and wire harnesses.
ENGINEERING VERIFICATION
Scissor Lifts & Aerial Work Platforms Operating Conditions and Cell / Pack Sizing
Submit Compartment & Load SpecsParent & sibling categories in Machine Equipment: Electric Excavators & Compact Loaders, Electric Forklifts & Pallet Trucks, Sanitation Vehicles & Street Sweepers, Floor Scrubbers & Cleaning Machines, Electric Agricultural Machinery. Related voltage catalog: 24V & 48V Prismatic Platforms.
Swing-Out Chassis Tray Envelope & Trojan T-105 / L16 Group Fit
Slab scissor lifts mount four 6V lead-acid batteries in swing-out side trays; custom 25.6V (8S) or 51.2V (16S) LiFePO4 steel boxes are sized to drop into existing chassis trays.
Hydraulic Lift Pump Inrush & Cold Jobsite Voltage Hold
Lifting a loaded platform draws 120 A–200 A hydraulic motor surges; low-impedance 100Ah–230Ah prismatic LiFePO4 cells prevent low-voltage cutout lockouts on cold mornings.
Rental Fleet Deep-Discharge Recovery & Zero Maintenance
Construction workers frequently leave lifts unplugged over weekends; BMS low-voltage sleep mode prevents permanent cell damage and eliminates acid spills on finished indoor floors.
On-Board Delta-Q / Zivan Charger Curve Selection
Select the LiFePO4 charging profile on the lift's on-board charger or pair with a matched 29.2V / 58.4V CAN-enabled charger.
TECHNICAL REFERENCE
Scissor Lifts & Aerial Work Platforms Battery Engineering FAQs
What LiFePO4 capacity replaces four 6V 225Ah lead-acid batteries in a 24V slab scissor lift?
Because LiFePO4 delivers 90%+ usable depth of discharge with zero Peukert sag under hydraulic pump loads, a 25.6V 150Ah or 200Ah LiFePO4 pack matches or exceeds the full-day lift cycles of a 24V 225Ah flooded lead-acid set.
Which prismatic cells are used for 48V articulated boom lifts?
48V (51.2V 16S) boom lifts typically use 3.2V 150Ah or 230Ah prismatic LiFePO4 cells in 16S1P or 16S2P configurations (7.68 kWh to 23.5 kWh).
Does switching to lithium affect the scissor lift's tilt safety weight?
Chassis counterweight requirements must be checked per lift model; custom steel battery enclosures can incorporate bottom ballast plates when required by the OEM specification.
Can we buy bare 3.2V 105Ah or 150Ah prismatic cells to assemble AWP packs?
Yes. All 3.2V 100Ah, 105Ah, 150Ah, and 230Ah prismatic cells are available as batch-matched bare cells or custom-assembled packs.
CUSTOM ENGINEERING & QUOTATION
Scissor Lifts & Aerial Work Platforms Battery Engineering Inquiry
Send your scissor or boom lift voltage (24V/48V), swing-out tray dimensions (mm), hydraulic pump current rating, and target fleet quantity.
Discuss on WhatsApp info@antbattery.comRELATED INDUSTRY CATEGORIES
All Industries ↗ Machine Equipment ↗ 24V & 48V Prismatic Platforms ↗ Custom OEM Battery Packs ↗