FINISHED PACK · 12.8V 6AH · 65×71×65MM
12.8V 6Ah Square LiFePO4 Battery Pack (65×71×65mm)
12.8 V nominal (14.6 V charge limit, 10.0 V cut-off) · 6000 mAh · ≤10 A (128 W) · 550 g · 65×71×65 mm · 15 cm leads · GB 31241-2014.
View ProductINDUSTRY / HOME & SECURITY / SECURITY CAMERAS
LiFePO4 Battery Packs & Cells for CCTV & Wireless Security Cameras
4S LiFePO4 battery packs rated at 12.8 V nominal voltage (14.6 V charge limit, 10.0 V discharge cutoff, GB 31241-2014) in 6000 mAh (6Ah, 550 g, Square 65×71×65 mm or Inline 33×71×130 mm) and 12000 mAh (12Ah, 1100 g, 65×71×130 mm) with 15 cm wire leads for outdoor 4G/Wi-Fi PTZ security cameras, perimeter CCTV poles, and remote surveillance systems.
- Nominal Voltage
- 12.8 V (14.6 V Charge)
- Camera Pack Formats
- 6Ah (550g) & 12Ah (1100g)
- Standard
- GB 31241-2014
MATCHED BATTERY PACKS & CELLS
Battery Packs and Cells for CCTV & Wireless Security Cameras
FINISHED PACK · 12.8V 6AH · 33×71×130MM
12.8V 6Ah Inline LiFePO4 Battery Pack (33×71×130mm)
12.8 V nominal (14.6 V charge limit, 10.0 V cut-off) · 6000 mAh · ≤10 A (128 W) · 550 g · 33×71×130 mm · 15 cm leads · GB 31241-2014.
View Product
FINISHED PACK · 12.8V 12AH · 65×71×130MM
12.8V 12Ah LiFePO4 Battery Pack (65×71×130mm)
12.8 V nominal (14.6 V charge limit, 10.0 V cut-off) · 12000 mAh · ≤20 A (256 W) · 1100 g · 65×71×130 mm · 15 cm leads · GB 31241-2014.
View Product
CYLINDRICAL CELL · HIGH-CAPACITY 18650
EVE 18650 35V 3.65V 3500mAh Cylindrical Cell
High-energy 3500 mAh 18650 cell for compact wireless trail cameras, cellular wildlife cameras, and battery-powered doorbell cameras.
View Product
PRISMATIC CELL · GOTION 3.2V 30AH LIFEPO4
Gotion 3.2V 30Ah LiFePO4 Prismatic Battery Cell
Compact aluminum-shell prismatic 3.2 V 30 Ah LiFePO4 cell for custom 4S 12.8V 30Ah/60Ah solar CCTV tower cabinet assemblies.
View ProductENGINEERING VERIFICATION
Outdoor Camera Bracket & Solar Controller Selection
Submit Pole Box DimensionsParent & sibling categories in Home & Security: Smart Locks, Access Control & Alarm Systems. Related catalog hub: 12V Lithium Battery Packs.
Square (65×71×65 mm) vs Inline (33×71×130 mm) Camera Bracket Geometry
Solar 4G PTZ camera mounts use either a square rear pole box or a slim under-panel channel. Both 12.8V 6000mAh packs share the exact 550 g mass and 76.8 Wh rating while adapting 2P4S 32700 cell placement to fit your bracket cavity.
Nighttime Infrared LED & PTZ Gimbal Continuous Wattage
Calculate 24-hour energy draw by combining daytime cellular standby (2 W–4 W) with nighttime IR illuminator and pan-tilt motor peaks (8 W–15 W). Upgrade to the 12.8V 12Ah (65×71×130 mm, 153.6 Wh) pack for multi-day rainy autonomy.
14.6 V Solar MPPT / PWM Charge Limit & 10.0 V Cut-Off
Our 4S LiFePO4 camera packs regulate upper charge voltage at 14.6 V and disconnect at 10.0 V via an internal BMS rated at ≤10 A (6Ah) or ≤20 A (12Ah), preventing over-discharge during extended winter cloud cover.
15 cm Wire Harness & Waterproof DC5521 / 2-Pin Plug Termination
Standard camera packs ship with 15 cm red (+) and black (-) leads for direct wiring to solar panel controllers, with optional pre-crimped DC5521 barrel jacks or waterproof aviation plugs for rapid pole installation.
TECHNICAL REFERENCE
CCTV & Wireless Security Camera Battery FAQs
What is the difference between the two 12.8V 6Ah LiFePO4 security camera battery packs?
Both 12.8V 6000mAh packs provide 76.8 Wh, 14.6 V charge limit, 10.0 V cut-off, ≤10 A current, and 550 g weight under GB 31241-2014, but the Square version measures 65×71×65 mm (2×2×2 arrangement) whereas the Inline version measures 33×71×130 mm (single-row 1×4×2 arrangement) for narrow camera arms.
How many days of rainy-weather backup does a 12.8V 6Ah or 12Ah pack provide for a 4G PTZ camera?
For a 4G solar camera drawing an average of 2.5 W (60 Wh per 24 hours), a 12.8V 6Ah (76.8 Wh) pack supports 1.2 days without sunlight, while the 12.8V 12Ah (153.6 Wh, 65×71×130 mm) pack supports 2.5 days of zero-sun autonomy.
Can these 12.8V LiFePO4 camera packs replace 12V sealed lead-acid batteries inside existing CCTV pole boxes?
Yes, provided the solar charge controller or AC/DC power supply output does not exceed 14.6 V. At 550 g (6Ah) and 1100 g (12Ah), the 4S LiFePO4 packs weigh less than one-third of equivalent SLA blocks.
What standard is marked on the 12.8V 6Ah and 12Ah CCTV battery pack labels?
Each factory-assembled 12.8V 6000mAh and 12000mAh LiFePO4 pack carries the GB 31241-2014 marking printed directly on its outer specification label along with polarity warnings and voltage/current ratings.
CUSTOM ENGINEERING & QUOTATION
CCTV & Wireless Security Camera Battery Inquiry
Specify your camera power draw, required capacity (6Ah, 12Ah, or custom Ah), enclosure geometry (Square 65×71×65 mm, Inline 33×71×130 mm, or Rectangular 65×71×130 mm), solar charge controller voltage, and order quantity.
Discuss on WhatsApp info@antbattery.com