PRISMATIC CELL · 3.2V 280AH LIFEPO4
3.2V 280Ah LiFePO4 Prismatic Battery Cell
Nominal voltage 3.2 V · Nominal capacity 280 Ah (896 Wh) · 71173207 aluminum-shell prismatic format · LiFePO4 chemistry.
View SpecificationsINDUSTRY / MACHINE EQUIPMENT / EARTHMOVING & COMPACT CONSTRUCTION
Electric Excavators & Compact Loaders: Compatible Voltage Platforms & Custom Options
1-to-6-ton compact electric excavators, skid-steer loaders, and tracked site dumpers drive variable-displacement hydraulic pumps under continuous shock and vibration. Review compatible 3.2V 150Ah–314Ah prismatic LiFePO4 cell platforms for custom 48V, 72V, 96V, and high-voltage counterweight battery boxes.
- Application Scope
- 1–6 ton electric mini excavators, skid steer loaders, crawler dumpers
- Voltage Platform
- 48 V, 72 V 140Ah (10.08 kWh), and custom 96V–300V+ traction boxes
- Cell Options
- 3.2V 230Ah / 280Ah / 304Ah / 314Ah Prismatic LiFePO4 Cells
COMPATIBLE BARE CELLS · EARTHMOVING & COMPACT CONSTRUCTION
Compatible Voltage Platforms & Custom Options
PRISMATIC CELL · 3.2V 314AH LIFEPO4
3.2V 314Ah LiFePO4 Prismatic Battery Cell
Nominal voltage 3.2 V · Nominal capacity 314 Ah (1004.8 Wh) · 71173207 aluminum-shell prismatic format · LiFePO4 chemistry.
View Specifications
PRISMATIC CELL · 3.2V 230AH LIFEPO4
3.2V 230Ah LiFePO4 Prismatic Battery Cell
Nominal voltage 3.2 V · Nominal capacity 230 Ah (736 Wh) · Aluminum-shell prismatic format · LiFePO4 chemistry.
View Specifications
PRISMATIC CELL · 3.2V 150AH LIFEPO4
3.2V 150Ah LiFePO4 Prismatic Battery Cell
Nominal voltage 3.2 V · Nominal capacity 150 Ah (480 Wh) · Aluminum-shell prismatic format · LiFePO4 chemistry.
View SpecificationsCUSTOM BATTERY PACK ENGINEERING (EARTHMOVING & COMPACT CONSTRUCTION)
Need a Custom 48 V Pack for Electric Excavators & Compact Loaders?
AntBattery currently supplies matched bare cells (3.2V 230Ah / 280Ah / 304Ah / 314Ah Prismatic LiFePO4 Cells) and assembles custom 48 V, 72 V 140Ah (10.08 kWh), and custom 96V–300V+ traction boxes series-parallel battery packs for 1–6 ton electric mini excavators, skid steer loaders, crawler dumpers with tailored L × W × H enclosures, BMS current ratings, and wire harnesses.
ENGINEERING VERIFICATION
Electric Excavators & Compact Loaders Operating Conditions and Cell / Pack Sizing
Submit Compartment & Load SpecsParent & sibling categories in Machine Equipment: Electric Forklifts & Pallet Trucks, Sanitation Vehicles & Street Sweepers, Floor Scrubbers & Cleaning Machines, Scissor Lifts & Aerial Work Platforms, Electric Agricultural Machinery. Related voltage catalog: 72V & Prismatic Traction Platforms.
Hydraulic Pump Load Spikes & Boom/Bucket Stall Current
Trenching and rock-breaking generate cyclical hydraulic pressure surges; prismatic cells and busbars must sustain continuous 0.8C–1C draw with frequent 2C pump peaks.
Counterweight Steel Box Mass & Center-of-Gravity Balance
Replacing a diesel engine in a mini excavator requires maintaining rear counterweight mass so the machine does not tip forward at full dipper-arm extension.
Multi-Axis Shock, Vibration & Laser-Welded Aluminum Busbars
Tracked travel over rubble subjects battery modules to severe low-frequency shock; rigid steel end-plates and laser-welded terminal busbars prevent tab fatigue.
Jobsite Opportunity Charging & Thermal Management
Specify liquid-cooled cold plates or forced-air heating pads inside sealed steel enclosures for year-round outdoor construction duty.
TECHNICAL REFERENCE
Electric Excavators & Compact Loaders Battery Engineering FAQs
What prismatic LiFePO4 cell capacities are used in compact electric excavator battery boxes?
1.5-ton to 3-ton mini excavators typically integrate 3.2V 230Ah, 280Ah, or 314Ah prismatic LiFePO4 cells in 16S (51.2V), 24S (76.8V), or 30S (96V) series strings totaling 15 kWh to 45 kWh.
Why are prismatic aluminum-shell LiFePO4 cells preferred for construction machinery?
Hard-case 71173207 prismatic cells (280Ah/314Ah) allow rigid mechanical clamping with steel tie-rods and laser-welded busbars that withstand continuous excavator boom vibration.
How is cold-weather morning startup handled on outdoor construction sites?
Custom machinery packs integrate silicone heating films controlled by the BMS to warm LiFePO4 cells above 5°C before enabling high-current regenerative hydraulic charging.
Can AntBattery build custom counterweight-shaped steel battery enclosures for OEMs?
Yes. Send your chassis CAD envelope, hydraulic motor controller voltage, continuous/peak kW, and charging connector spec to our Custom Battery Pack engineering team.
CUSTOM ENGINEERING & QUOTATION
Electric Excavators & Compact Loaders Battery Engineering Inquiry
Share your excavator or loader operating weight, hydraulic motor voltage (48V/72V/96V+), target kWh capacity, and counterweight compartment dimensions.
Discuss on WhatsApp info@antbattery.comRELATED INDUSTRY CATEGORIES
All Industries ↗ Machine Equipment ↗ 72V & Prismatic Traction Platforms ↗ Custom OEM Battery Packs ↗