INDUSTRY / 3C & COMMERCIAL ELECTRONICS / CASH COUNTERS
Rechargeable 3S lithium-ion and lithium-polymer battery packs (10.8 V nominal / 12.6 V maximum charge voltage, 2550 mAh–5000 mAh) and high-rate 18650 / 21700 cylindrical cells engineered for portable money counters, desktop cash counting machines, UV/MG/IR counterfeit detectors, and currency sorters.
MATCHED BATTERY PACKS & CELLS
FINISHED BATTERY PACK · MODEL 7050100-4000MAH
12.6 V max operating voltage · 4000 mAh (4.0 Ah) · Blue PVC heat-shrink sleeve, epoxy end insulation, 200°C silicone leads & 2-pin white connector.
View Battery Pack
CUSTOM OEM BATTERY PACK · COMPARTMENT FIT
Custom L × W × T dimensions, JST/Molex 2-pin or 3-pin NTC thermistor plug, PVC shrink or ABS enclosure, and matched BMS protection thresholds.
Configure Custom Pack
CYLINDRICAL CELL · 3S 18650 BUILD
3.6 V nominal, 2550 mAh cylindrical lithium-ion cell for compact 3S1P (2.55 Ah) and 3S2P (5.1 Ah) portable money counter and counterfeit detector battery packs.
View 18650 Cell
CYLINDRICAL CELL · 3S1P 21700 4000MAH
3.6 V nominal, 4000 mAh high-rate cylindrical lithium-ion cell for 3S1P (10.8 V nominal / 12.6 V max, 4000 mAh) high-speed bill counter and currency sorter packs.
View 21700 CellENGINEERING VERIFICATION
Related 12V & Commercial categories: 3C & Commercial Electronics, CCTV & Wireless Security Cameras (12.8V 6Ah & 12Ah), and Solar Street Lights & Outdoor Lighting (12.8V 12Ah–24Ah).
Portable money counters and desktop bill counters use compact internal battery compartments. Measure the maximum internal bay length, width, and thickness in millimeters to allow for outer heat-shrink or ABS housing, end-cap insulation, and BMS protection board clearance.
Standard 3S lithium-ion and lithium-polymer currency counter packs operate with a 10.8 V–11.1 V nominal voltage and a 12.6 V maximum upper charge cutoff (4.20 V per cell). Confirm that the machine's charging circuit regulates to 12.6 V max and does not apply 13.8 V–14.6 V lead-acid or 4S LiFePO4 float voltages.
Verify the wire harness length, wire gauge, and PCB header connector type (2-pin power plug or 3-pin plug with 10kΩ NTC temperature sensing) as well as positive (+) and negative (-) pin orientation on the cash counter mainboard.
Share your cash counter's continuous wattage (typically 40 W–80 W) and roller motor startup surge current so continuous discharge rating, cell internal resistance (whether polymer, 18650, or 21700), and BMS over-current protection thresholds are matched.
TECHNICAL REFERENCE
Portable money counters, handheld currency counters, and desktop bill counters typically run on 3S lithium-ion or lithium-polymer battery packs rated at 10.8 V–11.1 V nominal voltage with a 12.6 V maximum charge cutoff, in capacities ranging from 2550 mAh to 5000 mAh (such as our standard 12.6V 4000mAh cash counter battery pack).
Cash Counters & Currency Equipment (/industry/consumer-electronics/cash-counters) is organized under 3C & Commercial Electronics (/industry/consumer-electronics) alongside POS terminals, barcode scanners, and commercial handheld instruments.
Yes. Equipment brands and service centers ordering turnkey replacements select our finished 12.6V 4000mAh cash counter battery pack or a custom-harness pack, while pack assemblers can order batch-matched EVE 18650 26V (2550 mAh) or EVE 21700 40P (4000 mAh) cylindrical cells for 3S1P/3S2P assembly.
Cash counter battery packs use a 3S lithium configuration (12.6 V max charge cutoff) for compact indoor currency equipment, whereas our 12.8 V 6Ah–12Ah CCTV camera packs and 12.8 V 12Ah–24Ah solar street light packs use 4S LiFePO4 chemistry (14.6 V charge limit, 10.0 V discharge cutoff). Their chargers must not be interchanged.
Provide your currency counter's internal battery bay length, width, and thickness limits in millimeters along with connector pin pitch and polarity. Our engineering team verifies mechanical clearance against our standard 12.6V 4000mAh pack or configures a custom-fit 3S assembly.
Standard delivery lead time is 30–60 Days, backed by a 30 days free return warranty and technical support policy. Share your target order quantity and destination country to receive a formal quotation and pack drawing.
CUSTOM ENGINEERING & QUOTATION
Share your portable money counter or desktop bill counter model, battery bay dimensions (L × W × T in mm), 2-pin or 3-pin NTC connector specification, target order quantity, and destination country.
Discuss on WhatsApp info@antbattery.com