UAV BATTERY PACK · INDUSTRIAL SERIES
Industrial & Commercial UAV Battery Packs (6S–14S)
High-energy-density (270–400 Wh/kg) semi-solid-state and high-rate pouch packs for mapping, inspection, and cargo drones.
View SpecificationsINDUSTRY / DRONE & UAV / SURVEYING, INSPECTION & LOGISTICS UAV
Lithium Battery Packs & Cells for Industrial, Mapping & Delivery UAVs
Multi-rotor surveying UAVs, powerline inspection drones, and BVLOS cargo platforms depend on gravimetric energy density (270–400 Wh/kg) to extend hover endurance under LiDAR, gimballing optical zoom, and winch payloads. AntBattery supplies 6S–14S smart UAV battery packs, semi-solid pouch cells, and 5700mAh 21700 cells.
- Application Scope
- Powerline inspection drones, LiDAR mapping UAVs, cargo delivery drones
- Voltage Platform
- 6S (22.2V), 12S (44.4V), and 14S (51.8V) smart UAV battery packs
- Cell Options
- 50Ah & 72Ah Semi-Solid Pouch Cells (270–350 Wh/kg)
MATCHED BATTERY PACKS & CELLS · SURVEYING, INSPECTION & LOGISTICS UAV
Battery Packs and Grade-A Cells for Industrial, Mapping & Delivery UAVs
SEMI-SOLID UAV SERIES · 350 WH/KG
350 Wh/kg Semi-Solid-State UAV Battery Series
350 Wh/kg gravimetric energy density · High-specific-energy semi-solid pouch platform.
View Specifications
SEMI-SOLID AVIATION SERIES · 400 WH/KG
400 Wh/kg Semi-Solid-State Battery Series
400 Wh/kg gravimetric energy density · Ultra-lightweight semi-solid pouch cell platform.
View Specifications
SEMI-SOLID UAV SERIES · 270 WH/KG
270 Wh/kg Semi-Solid-State UAV Battery Series
270 Wh/kg gravimetric energy density · 6S–14S pouch cell and pack platform.
View Specifications
CYLINDRICAL CELL · 3.6V 5700MAH LI-ION
EVE 21700 58E 3.6V 5700mAh Cylindrical Cell
Nominal voltage 3.6 V · Nominal capacity 5700 mAh · Cylindrical 21 × 70 mm format · Ultra-high-capacity 21700 cell.
View Specifications
CUSTOM OEM PACK · ENGINEERED FIT
Custom Lithium Battery Pack Assembly (12V–96V+)
Custom L × W × T enclosure, CAN/RS485/SMBus BMS, waterproof IP67 housing, and matched wire harnesses.
View SpecificationsCUSTOM BATTERY PACK ENGINEERING (SURVEYING, INSPECTION & LOGISTICS UAV)
Need a Custom 6S (22.2V) Pack for Industrial, Mapping & Delivery UAVs?
AntBattery currently supplies matched bare cells (50Ah & 72Ah Semi-Solid Pouch Cells (270–350 Wh/kg)) and assembles custom 6S (22.2V), 12S (44.4V), and 14S (51.8V) smart UAV battery packs series-parallel battery packs for Powerline inspection drones, LiDAR mapping UAVs, cargo delivery drones with tailored L × W × H enclosures, BMS current ratings, and wire harnesses.
ENGINEERING VERIFICATION
Industrial, Mapping & Delivery UAVs Operating Conditions and Cell / Pack Sizing
Submit Compartment & Load SpecsParent & sibling categories in Drone & UAV: Agricultural Spraying & Spreading Drones, FPV Racing & Long-Range Drones, eVTOL & Long-Endurance VTOL UAVs. Related voltage catalog: Industrial & Commercial UAV Battery Catalog.
Takeoff Gross Weight (TOGW) vs Specific Energy (Wh/kg)
Every 100 g shaved from the battery pack directly increases LiDAR or thermal camera flight minutes. Compare 270 Wh/kg, 350 Wh/kg, and 400 Wh/kg semi-solid pouch series against your payload mass budget.
6S (22.2V), 12S (44.4V) & 14S (51.8V) Bus Architecture
Match series cell count to your ESC voltage ceiling and motor Kv rating to minimize phase-wire resistive heating during high-altitude or high-wind station keeping.
End-of-Mission Voltage Sag & Reserve Landing Margin
High-energy semi-solid pouch cells maintain a stable discharge plateau down to 3.0 V–3.2 V per cell; configure flight-controller RTL (Return-to-Launch) thresholds to match the semi-solid discharge curve.
Smart BMS Telemetry & Anti-Spark Power Connectors
Specify AS150U, XT90-S, or custom blind-mate slide connectors alongside drone flight-controller telemetry for real-time cell-group voltage and temperature reporting.
TECHNICAL REFERENCE
Industrial, Mapping & Delivery UAVs Battery Engineering FAQs
How much flight time gain does a 350 Wh/kg semi-solid UAV pack provide over a 200 Wh/kg LiPo pack?
At an identical battery weight on a 12S mapping quadcopter or hexacopter, upgrading from 200 Wh/kg LiPo to 350 Wh/kg semi-solid pouch architecture typically increases airborne mission duration by 45% to 65%.
What voltage configurations are standard for commercial mapping and inspection drones?
Medium survey multirotors typically run 6S (22.2 V–22.8 V) 10Ah–30Ah packs, while heavy-lift LiDAR and logistics UAVs run 12S (44.4 V) or 14S (51.8 V) packs or dual-6S series pairs.
Can EVE 21700 58E (5700mAh) cylindrical cells be used in fixed-wing mapping UAVs?
Yes. Fixed-wing and tail-sitter survey planes with lower cruise C-rates (0.5C–1.5C) frequently use 6S2P or 6S3P EVE 21700 58E (5700 mAh) cylindrical packs for compact fuselage integration.
How are cells matched for 12S and 14S industrial drone battery packs?
Every pouch or cylindrical cell is graded by capacity, open-circuit voltage, and AC/DC internal resistance before series-parallel laser or ultrasonic tab welding.
CUSTOM ENGINEERING & QUOTATION
Industrial, Mapping & Delivery UAVs Battery Engineering Inquiry
Share your airframe takeoff weight, hover power (W), peak climb current (A), series configuration (6S–14S), and battery bay dimensions.
Discuss on WhatsApp info@antbattery.comRELATED INDUSTRY CATEGORIES
All Industries ↗ Drone & UAV ↗ Industrial & Commercial UAV Battery Catalog ↗ Custom OEM Battery Packs ↗